分享 收藏

TOYOPEARL 疏水層析填料

品牌：TOYOPEARL
產地：亞洲日本
供應商報價：面議

東曹（上海）生物科技有限公司更新時間：2025-04-28 14:09:21

銷售范圍售全國

入駐年限第10年

營業執照已審核

同類產品疏水層析(1件)

立即掃碼咨詢

聯系方式：021-34610856

聯系我們時請說明在儀器網（www.shangjinews.cn）上看到的!

掃碼分享

為您推薦

TOYOPEARL 疏水層析填料

詳細介紹

Hydrophobic interaction chromatography (HIC) is a powerful tool for the process purification of biomolecules. The technique utilizes the accessible hydrophobic regions located on protein surfaces and their interactions with a weakly hydrophobic stationary phase. HIC is an excellent complement to ion exchange and size exclusion chromatography particularly when protein isoforms exist or when feedstock impurities are of similar isoelectric point or molecular weight. The selectivity differences exploited by HIC can also be used after affinity separations in which closely related proteins with similar recognition sites are not distinguishable by the affinity ligand.

Proteins and other molecules with hydrophobic surfaces are attracted to the hydrophobic ligands of both reversed phase (RPC) and HIC resins. RPC resins have higher surface coverage and/or more hydrophobic ligand compared to HIC resins. Because of this, in a RPC separation the target binding readily occurs in an aqueous solution, and desorption is promoted by the addition of an increasing amount of organic solvent. In HIC, proteins are bound to the resin by employing an aqueous high salt mobile phase. The salt conditions contribute to a lyotropic effect which allows the proteins to bind to the lower surface coverage of a hydrophobic ligand. Proteins are eluted by the simple technique of decreasing the salt concentration. Most therapeutic targets are eluted in a low salt or a no salt buffer. During elution the energy of interaction for a HIC step is less than that of a RPC step. One means of gauging the relative binding energy between the two techniques is to measure the surface tension of the two sets of binding and elution conditions. Since HIC
separations are done with under milder eluting conditions, biological activity is typically retained.

Tosoh Bioscience offers five HIC ligands featuring different degrees of hydrophobicity and selectivity. The hydrophobicity of HIC resins increases through the ligand series: Ether, PPG (polypropyleneglycol), Phenyl, Butyl, and Hexyl.

Hydrophobic Interaction Chromatography

Ether HIC Resins

TOYOPEARL and TSKgel Ether hydrophobic interaction chromatography (HIC) resins have the highest hydrophilicity (lowest hydrophobicity) of the HIC ligands offered by Tosoh Bioscience. The Ether ligand is useful for very hydrophobic molecules such as membrane proteins. It is typically used in intermediate purification and polishing steps. For high performance separations, the use of TSKgel Ether-5PW media is suggested. Both TOYOPEARL and TSKgel Ether products have the same selectivity.

The following Ether HIC resins are currently available from Tosoh Bioscience (available grades noted):

TOYOPEARL Ether-650 (M, S grades)

TSKgel Ether-5PW (20 and 30 micron)

PPG HIC Resins

TOYOPEARL PPG (polypropylene glycol) hydrophobic interaction chromatography (HIC) resin has the second highest hydrophilicity (second lowest hydrophobicity) of the HIC ligands offered by Tosoh Bioscience. It has been optimized for the purification of monoclonal antibodies and is used as an intermediate purification or polishing step. It has extremely good capacity and recovery for mAbs.

The following PPG HIC resin is currently available from Tosoh Bioscience (available grades noted):

TOYOPEARL PPG-600 ( M-grade only)

Phenyl HIC Resins

TOYOPEARL and TSKgel Phenyl hydrophobic interaction chromatography resins are located in the middle of the hydrophobicity range of the five HIC ligands offered by Tosoh Bioscience. Primary applications are for the separation of proteins, their isoforms, and aggregate removal. It is typically used in intermediate purification and polishing steps. For high performance separations, the use of TSKgel Phenyl-5PW media is suggested. Both TOYOPEARL and TSKgel resin products have the same selectivity.

The following Phenyl HIC resins are currently available from Tosoh Bioscience (available grades noted):

TOYOPEARL Phenyl-650 (C,M, and S-grades)	TSKgel Phenyl-5PW (20 and 30 micron)
TOYOPEARL Phenyl-600 (M-grade only)

Butyl HIC Resins

TOYOPEARL Butyl hydrophobic interaction chromatography (HIC) resins have the second highest hydrophobicity of the HIC ligands offered by Tosoh Bioscience. There are three pore sizes available for this ligand and each has been optimized for a specific molecular size profile. The primary applications for TOYOPEARL Butyl resins are the separation of proteins, their isoforms, and aggregate removal. Butyl resins are typically used in intermediate purification and polishing steps, though they can also be used for capture of your target molecule.

The following Butyl HIC resins are currently available from Tosoh Bioscience (available grades noted):

TOYOPEARL Butyl-650 (C,M, and S-grades)	TOYOPEARL Butyl-600 (M-grade only)
TOYOPEARL SuperButyl-550 (C-grade only)

Hexyl HIC Resins

TOYOPEARL Hexyl hydrophobic interaction chromatography (HIC) resin has the highest hydrophobicity of the HIC ligands offered by Tosoh Bioscience. It is used for very hydrophilic proteins or where a low salt elution environment is required. It is useful as an early capture step or for intermediate purification.

The following Hexyl HIC resin is currently available from Tosoh Bioscience (available grades noted):

TOYOPEARL Hexyl-650 (C-grade only)